$ 16.99
| /
Sil-Glyde Technician Grade Brake Lubricant – 8 oz Brush Top Can
Sil-Glyde Technician Grade is the professional brake-system silicone lubricant for caliper slide pins, pad backing plates, abutment clips, and shoe-to-backing-plate contact points. The 8 oz brush-top can is the right size for busy shops and multi-vehicle households – same brake-proven formula as the 4 oz BK-44, double the product so you stay stocked through back-to-back brake jobs.
Key Features
- Anti-Squeal Silicone Formula – eliminates brake squeal by lubricating slide pins, pad backs, and hardware contact points where metal-on-metal friction causes noise.
- Brake-Safe Chemistry – won't attack rubber dust boots, EPDM caliper seals, or piston seals; tested compatible with DOT 3 & DOT 4 brake fluid.
- High-Temperature Rating – effective from -40°F to 500°F; stays in place under repeated heavy braking and summer heat soak.
- Brush-Top Applicator – clean, precise placement on contact surfaces without contaminating rotor or pad friction faces.
- 8 oz Shop-Size Container – value-per-ounce advantage for fleet shops, performance garages, and frequent DIY brake jobs.
Where to Use It
- Caliper slide pins and guide bushings
- Brake pad backing plates (anti-squeal contact points only – never the friction surface)
- Brake pad abutment clips and anti-rattle hardware
- Drum brake shoe-to-backing-plate contact pads
- Parking brake cable ends and pivot points
- ABS sensor boot seating during installation
Pro Tip
Lubricate sliding contact surfaces only. Keep Sil-Glyde away from rotor surfaces and pad friction faces. A thin film on slide pins and pad backs is all that's required for a quiet, even-wearing brake system. The 8 oz brush top makes it easy to apply just the right amount every time.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov