$ 2.31
| /
M8x1.0 Stainless Steel Brake Bleeder Screw – 8MM Hex, 29.7MM Length
The AGS BBS-series stainless steel brake bleeder screw is a corrosion-proof replacement for the OE plated-steel bleeders that round off, seize, or snap during brake service. Stainless construction resists road salt, brake fluid exposure, and humidity for service life that lasts the life of the caliper.
Specifications
- Thread: M8x1.0
- Hex Size: 8MM
- Overall Length: 29.7MM
- Material: Stainless steel
- Packaging: Bag of 1
Typical Fitment
European & Asian — fine-thread M8 brake calipers. Always verify the exact thread, length, and hex size of the original bleeder screw before ordering.
Why Stainless
- Corrosion-Proof – resists salt, brake fluid, and humidity that cause OE bleeders to seize.
- Harder Hex Flats – fewer rounded edges from repeated brake service.
- OE Profile – matches factory dimensions for a leak-free seat and clean fluid path.
Replace When
- Existing bleeder rounded, seized, or snapped during service
- Caliper rebuild or remanufactured caliper install
- Routine brake hardware refresh on high-mileage or fleet vehicles
After You Replace the Bleeder Screw
Replacing a bleeder screw almost always means bleeding that brake circuit afterward. Do it solo in minutes with a Motive one-person brake bleeder kit, and check whether your fluid is due for a flush first with the 5101 Brake Fluid Tester. Shop all stainless steel bleeder screws by thread size.