$ 92.65
| /
1735 PowerFill Pro – 1-Gallon Manual Fluid Transfer Pump & Pressure Dispenser
The Motive Products 1735 PowerFill Pro is the professional shop standard for pressurized fluid transfer. A USA-made ball valve delivers snap-shut, drip-free control at the hose end; the integrated Schrader valve pressurizes the 1-gallon translucent tank in seconds with any tire inflator or hand pump — no shop air or electricity required. The stainless quick-connect snaps to Motive NPT adapters for direct fill-plug service on transmissions, differentials, transfer cases, and cooling systems. This listing is for the tank-only configuration — no adapters included.
Key Features
- 1-Gallon Translucent Tank — ample capacity for single-vehicle service; see fill level without guessing.
- Schrader Valve — pressurize to operating pressure or release safely using any standard tire inflator; no hand pumping.
- Stainless Quick-Connect — mates directly with Motive NPT adapters, pre-lube adapters, and PowerFill adapters; swap adapters tool-free.
- Chemical-Resistant Seals — safe with synthetic and conventional engine oil, ATF, gear lube, and coolant.
Recommended Applications
- Manual transmission and differential gear-oil fills — no more squeeze bottles or hand pumps
- Automatic transmission fluid service via drain-plug or fill-plug adapters
- Transfer-case and limited-slip diff service on trucks and SUVs
- Coolant refills and hydraulic clutch reservoir top-offs
- Engine pre-lube when paired with Motive NPT pre-lube adapters (sold separately)
Which Motive Fluid Transfer Pump Is Right for You?
Motive builds three fluid-handling systems. Pick by job direction and capacity:
| Model | Best for | Capacity | Direction | Pressurization |
|---|---|---|---|---|
| 1735 PowerFill Pro (this product) | Filling gearboxes, diffs & transfer cases on a single vehicle | 1 gallon | Dispenses (pushes fluid in) | Schrader valve – any tire inflator |
| 1745 PowerFill Pro | Multi-vehicle shops & fleet bays; fewer refills | 2 gallons | Dispenses (pushes fluid in) | Hand pump with 0–30 psi gauge |
| 1702 Power Extractor | Removing oil, ATF & brake fluid topside — no lift needed | 2 gallons | Extracts (pulls fluid out) | Manual vacuum pump |
If you need to remove old fluid before refilling, pair the 1735 with the 1702 Power Extractor for a complete drain-and-fill workflow without crawling under the vehicle.
Specifications
- Tank capacity: 1 US gallon (4 quarts), translucent for visible fluid level
- Shutoff: USA-made ball valve at hose end — zero-drip control
- Pressurization: Schrader valve (compressor or hand tire pump)
- Seals: chemical-resistant; compatible with synthetic/conventional oil, ATF, gear lube, coolant
- Connection: stainless quick-connect for Motive NPT and PowerFill adapters (SKUs 1188, 1138, 1144, 1140, 1190)
What's Included
1735 PowerFill Pro 1-gallon tank with ball valve, Schrader valve, quick-connect hose assembly, and wide-mouth filler cap with strainer. Adapters and pre-lube fittings sold separately — see Motive Products SKUs 1188, 1138, 1144, 1140, and 1190. Full directions: PowerFill instructions.
Fluid Transfer Pump FAQ
Is the 1735 a manual fluid transfer pump?
Yes. It's a manually pressurized transfer pump — no electricity required. Charge the tank through the Schrader valve with any hand tire pump or shop compressor, then the ball valve controls flow. Nothing to plug in and no batteries.
What fluids can I transfer with it?
Gear oil, ATF, synthetic and conventional engine oil, coolant, and hydraulic clutch fluid. The seals are chemical-resistant for all common automotive service fluids.
Can I fill a transmission or differential through the fill plug?
Yes — that's the primary use. Connect the matching Motive NPT adapter to the stainless quick-connect and dispense fluid straight into the fill plug, no funnels or squeeze bottles.
Do I need shop air or a compressor?
No. The Schrader valve accepts any standard tire inflator or hand pump, so the 1735 works anywhere — driveway, track, or shop bay.
What's the difference between PowerFill and Power Extractor?
PowerFill dispenses fluid into a component under pressure. The Power Extractor removes old fluid by vacuum. Use them together for a full drain-and-fill.
WARNING: Reproductive Harm – www.P65Warnings.ca.gov