Sil-Glyde Silicone Brake Lubricant – 8 oz Tube

Sil-Glyde Silicone Brake Lubricant – 8 oz Tube

Sil-Glyde Silicone Brake Lubricant in tube format delivers the shop-proven high-temperature silicone grease to every caliper pin, pad backing plate, shim, and slide in a convenient squeeze-tube applicator. The 8 oz tube is the professional size – enough product to carry a fleet shop or performance garage through weeks of back-to-back brake jobs without restocking.

Key Features

• 425°F (218°C) Heat Resistance – won't burn off or carbonize under extreme rotor and caliper temperatures during hard braking.
• Noise-Damping Silicone Film – absorbs vibration at brake contact points to silence squeal at the source, not just mask it.
• Rubber-Safe Formula – compatible with EPDM and nitrile caliper seals, dust boots, and plastics; no swelling or pitting.
• Moisture-Proof & Dielectric – blocks water, road salt, and corrosion on metal contact surfaces and ABS wear sensors.
• Long-Lasting Cling – stays bonded through repeated heat cycles and brake applications, reducing comeback labor and squeal callbacks.
• Tube Applicator – squeeze directly onto small contact areas with precision; no brush required, no mess.

Where to Apply

• Caliper slide pins and guide boots – prevents sticking, ensures even pad wear
• Pad ears, backing plates, and shims – eliminates squeal and vibration transfer
• Drum brake anchor points and backing-plate contact pads – stops chatter, eases adjustment
• ABS and parking-brake cables – seals out moisture, maintains smooth cable travel
• Anti-rattle clips and abutment hardware

Pro Tip

Apply a thin film to metal sliding contact surfaces only – never to pad friction faces or rotor surfaces. The tube format makes it easy to meter the exact amount needed on tight caliper pins and small abutment clips without over-application.

WARNING: Reproductive Harm – www.P65Warnings.ca.gov